How to use this calculator
- Enter one IRA’s balance on December 31 of the year before your first payment, and your birth year and month. A 72(t) plan runs on one account; the calculator ranks the three methods by the first year’s payment.
- Choose the month and year of the first payment. That month sets the highest interest rate the two fixed methods may use, and the first payment’s date starts the five years.
- Choose a life expectancy table. Single Life uses your age alone and gives the largest RMD and amortization payments; Uniform Lifetime assumes a beneficiary ten years younger, so it pays less; Joint and Last Survivor uses your beneficiary’s actual age.
- Change the return to see how each method’s balance holds up. Under More options, set your exact birth and payment days, a year for the one-time switch to the RMD method, or a yearly amount to see the balance each method needs.
The numbers already filled in are an example. Replace them with your own. Once payments start, changing them before the end date (other than the one-time switch, an account that runs out, death or disability) brings back the 10% on the earlier payments made before 59½, so it is worth having a tax professional check the figures and the custodian’s paperwork first.
How it's calculated
The three methods are the ones in IRS Notice 2022-6, which governs every series started since 2023. Each starts from the life expectancy table you choose, at your age on your birthday in the year of the payment.
- The required minimum distribution method divides the account’s December 31 balance by the table’s number for that year. It is worked out again every year, so the payment moves with the account.
- Fixed amortization pays the balance down in level amounts over the first year’s life expectancy, at the chosen interest rate, like a loan. The amount never changes.
- Fixed annuitization divides the balance by what $1 a year for life is worth today, from the IRS’s own mortality rates and the chosen rate. The amount never changes.
The fixed methods may use any rate up to the greater of 5% and 120% of the federal mid-term rate for either of the two months before the first payment. Both fixed methods count each year’s payment at the end of the year, as the IRS’s own example does. The plan must continue until the later of the day you reach 59½ and five years after the first payment.
The IRS’s example
The IRS’s questions and answers on these payments work an example: $400,000, age 50, the Single Life table (36.2 years) and a 4% rate. The calculator gives $11,049.72 by the RMD method, an amortization factor of 18.9559 and $21,101.63, and an annuity factor of 18.1568 and $22,030.33, which round to the IRS’s $11,050, $21,102 and $22,030.
The example above
With $500,000, a first payment on December 1, 2026 at age 50, and the Single Life table (36.2 years), the highest rate allowed is 6.11%. The RMD method pays $13,812.15 the first year; fixed amortization (factor 14.4542) pays $34,592.01; fixed annuitization (factor 13.8300) pays $36,153.31. The plan must run until December 15, 2035. At a 7% return, the RMD method’s payment is $25,214 in 2035. At a 0% return, fixed annuitization would leave $138,467 at the end of 2035.
Assumptions and limits
- One IRA and one series. Several accounts each need their own series, worked out separately.
- The balance is the one on December 31 of the year before your first payment, for all three methods. The two fixed methods may instead use the balance on any date from that December 31 up to the first payment (Notice 2022-6, section 3.02(d)), which the calculator does not model; keep the field at December 31, because the RMD method reads it as that date.
- Every payment is treated as fully taxable. With after-tax money in the IRA, the 10% and the recapture apply only to the taxable part.
- The account earns the return you enter every year, after fees. Real returns vary, and a fixed payment from a falling account can empty it; a reduced last payment from an empty account does not break the plan.
- The first year grows a full year at your return, whatever month the first payment is in, and each year’s payment is dated on the first payment’s month and day. A payment dated on or after the end date is not required.
- The recaptured tax counts only payments made before you reach 59½ and leaves out the interest the law adds for the deferral period: the regulations the law calls for have not been issued, and the IRS says to report it on Form 5329 without saying how to figure it.
- The day you reach 59½ is six months after your 59th birthday, on the same day of the month (the last day of a shorter month). No regulation defines it; this follows the IRS’s own example.
- The beneficiary used with the Joint and Last Survivor table stays your beneficiary. The IRS rules for a beneficiary who dies or is removed during the plan are not modeled.
- With the Joint table, fixed annuitization pays while either of you is alive. With the Uniform table, it uses your life alone.
- Income tax and state tax on the payments are not worked out. Neither are death or disability, a transfer or rollover after payments start, or a plan begun before 2022 under the older Rev. Rul. 2002-62.
- A 401(k) or other workplace plan needs you to have left that employer before payments start; the calculator does not check it. For a one-time early withdrawal, or the rule of 55, the 401(k) withdrawal calculator prices the 10% and its exceptions; for reaching Roth money early through conversions, see the Roth conversion calculator.
- The IRS monthly rates run through November 2026. For a later first payment, enter the missing months’ figures from the IRS rulings.
- In today’s dollars, amounts are divided by the inflation you set, compounded from the first year.
Input field details
What to enter in each box, where to find the number, and how this calculator treats it. When two calculators give different answers from the same numbers, it's usually because they handle one of these differently.
Balance on Dec 31 before your first payment
The balance of the one IRA the payments will come from, on December 31 of the year before your first payment, in whole dollars.
Where to find itYour December year-end statement from the IRA custodian.
How this tool treats itThe RMD method must use this December 31 balance. For the two fixed methods, the IRS also accepts the balance on any date from that December 31 up to the first payment (Notice 2022-6, section 3.02(d)); this calculator uses the December 31 balance for all three, so a fixed payment figured on a later balance will differ. Keep this field at December 31: the RMD figure reads it as that date. Each IRA is its own series: balances of several accounts cannot be added together.
Allowed range$1,000 to $50,000,000
Your birth year
The year you were born.
How this tool treats itYour age for the life expectancy tables is your age on your birthday in each calendar year, so only the year matters for it. Your birth month and day set the date you reach 59½.
Allowed range1950 to 2010
Your birth month
The month you were born.
How this tool treats itUsed for the date you reach 59½: six calendar months after your 59th birthday.
Your birth day
The day of the month you were born.
How this tool treats itYou reach 59½ on the same day of the month, six months after your 59th birthday; when that month is shorter, on its last day (born August 31, you reach 59½ on the last day of February). Born on February 29, you reach 59½ on August 29. No regulation defines the day; this follows the IRS’s own example (born August 15, 1968, 59½ on February 15, 2028).
Allowed range1 to 31; a day past the month’s end reads as its last day
First payment: year
The calendar year of the first payment of the series. For a plan that has already started, the year it started.
How this tool treats itEach calendar year is one distribution year. The ages used are your ages on your birthdays in that year, and the balance is the one on December 31 of the year before.
Allowed range2022 to 2035
First payment: month
The month of the first payment.
How this tool treats itThe month sets the interest-rate limit (from the IRS rates for the two months before it) and the date five years on. Each later year’s payment is dated on the same month and day.
First payment: day
The day of the month of the first payment.
How this tool treats itThe five years end on the same month and day five years after the first payment (a February 29 first payment ends on February 28 in a common year). A yearly payment dated on or after the date the plan may end is not required.
Allowed range1 to 31; a day past the month’s end reads as its last day
Life expectancy table
The IRS table the payments are figured from.
How this tool treats itSingle Life uses your age alone (26 CFR 1.401(a)(9)-9, Table 1). Uniform Lifetime is the table printed in Notice 2022-6, Appendix A, ages 10 to 120 and over. Joint and Last Survivor uses your age and your beneficiary’s (Table 3), with any beneficiary, not only a spouse. The same table must be used every year. The fixed annuitization method uses the mortality rates of the same regulation (Table 4): for your life alone with Single Life or Uniform Lifetime, and paid while either of you is alive with Joint and Last Survivor.
Not includedThe older tables of Rev. Rul. 2002-62, which a series started before 2022 may still use.
Beneficiary’s birth year
The birth year of the beneficiary named on your IRA on January 1 of the first payment year. With several beneficiaries, use the one the required minimum distribution rules name.
Where to find itThe beneficiary designation on file with your IRA custodian.
How this tool treats itUsed only with the Joint and Last Survivor table. The beneficiary’s age is their age on their birthday in each year. A birth year after the year before your first payment is read as that year, because the beneficiary is the one named on January 1.
Allowed range1920 to 2034
Not includedA beneficiary who dies or is replaced during the plan; the IRS rules for that are not modelled.
Interest rate
Leave it at the highest rate allowed, or choose a lower rate. A lower rate gives smaller fixed payments.
Where to find itThe limit is the greater of 5% and 120% of the federal mid-term rate for either of the two months before the month of your first payment (Notice 2022-6 §3.02(c)). The IRS publishes that rate each month in a revenue ruling, Table 1; this tool holds the rulings through November 2026.
How this tool treats itThe figure used is the annual-compounding column of Table 1, because the payments are yearly; the IRS does not name the column. A rate above the limit is lowered to the limit. The RMD method does not use a rate.
Allowed range0.01% to 15%, never above the limit for your first payment’s month
Return on the account
The yearly return you assume on the IRA, after fees.
How this tool treats itApplied in full every year, including the first whatever its month, with each year’s payment taken at the year’s end. It is separate from the interest rate above, which only sizes the fixed payments. With a fixed method, a low or negative return can empty the account; the payment that empties it is then smaller, and that is not a change to the plan.
Allowed range−10% to 20%
120% of the mid-term rate, the month before the first payment
Only when the month before your first payment is after November 2026: the 120% mid-term rate, annual column, from that month’s IRS revenue ruling, as printed (for example 5.54).
Where to find itThe IRS applicable federal rates page, https://www.irs.gov/applicable-federal-rates, Table 1 of the ruling for that month.
Allowed range0 (not entered) to 15
120% of the mid-term rate, two months before the first payment
Only when the month two months before your first payment is after November 2026: the 120% mid-term rate, annual column, from that month’s IRS revenue ruling, as printed.
Where to find itThe IRS applicable federal rates page, https://www.irs.gov/applicable-federal-rates, Table 1 of the ruling for that month.
Allowed range0 (not entered) to 15
Switch to the RMD method in
A calendar year after your first payment year in which a fixed method would switch to the RMD method, or leave it at never.
How this tool treats itNotice 2022-6 §3.03(b) allows one switch, from either fixed method to the RMD method, in any later year, and it is not a change to the plan. From that year on, the payment is the year’s starting balance divided by the life expectancy from the table you chose. The switch does not shorten how long the plan must run. A year at or before your first payment year, or after the last required payment, has no effect.
Allowed rangeA year from your second plan year to your last required payment
Yearly amount you want
A first-year payment you want, to see the IRA balance each method would need to pay it.
How this tool treats itEach balance is rounded up to the whole dollar, so its payment is at least the amount you want. A series is figured on one account’s own balance, so using only part of an IRA means a separate IRA holding that amount. For the RMD method, that account must hold it on December 31 of the year before the first payment; for the two fixed methods, on the date used to value it, from that December 31 up to the first payment.
Allowed range$0 (not set) to $5,000,000
Not includedThe transfer itself, and transfers or rollovers after payments start.
Show in today’s dollars
Turn on to show each year’s payment and balance divided by the inflation since the first payment year, at the rate below.
How this tool treats itA year’s figure is divided by (1 + inflation) once for each year from the first year to that year, counting both.
Inflation
The yearly inflation rate for the today’s-dollars view.
How this tool treats itUsed only when today’s dollars are on. It does not change any payment.
Allowed range0% to 10%
Questions
How much can I take from my IRA with a 72(t) plan?
Which 72(t) method gives the largest payment?
How long do 72(t) payments have to continue?
What happens if I change or stop a 72(t) plan early?
Can I switch 72(t) methods?
What interest rate can a 72(t) calculation use?
Does a 72(t) plan avoid income tax?
Version history
- November 10, 2026 (version 1.0.0): First version: the three IRS methods under Notice 2022-6 with the monthly interest-rate limit, the date the plan must run until, a projection at your return, the one-time switch and the recapture if changed.